How To Take Out Bearings On Skateboard Wheels
How To Take Out Bearings On Skateboard Wheels. If you don’t have it, no problem, use a ½” socket wrench because wheel nuts are usually 13mm, that’s ½”. Candle wax is probably the easiest way to get bearings out without a bearing press or vice;
It usually just pops right out with some light tapping. Now, soak the bearings for almost 10 minutes in acetone or bearing solvent to remove the stain and rust from the bearings. In that case, you reach at the end of an axle to take off the wheels.
It Usually Just Pops Right Out With Some Light Tapping.
In this video i show how to remove bearings from hard stubborn wheels using basic tools most people have. Axle nuts are used to secure the skateboard wheels placed on the outer side. One end of the bearing will press down strongly inside the wheel, the other end.
Be Careful When You Remove The Axle Nuts That You Don't Lose Any.
Apply a force of the right hand on the wheel shaft. You can do this by using a bearing puller or by prying them out with a flathead screwdriver. Obliterate the wheel and use the puller to hook the skateboard bearing out.
How Do You Take Apart A Wheel Bearing?
So the foremost step is unscrewing the nuts. To remove the inner wheel bearing, you need to remove the seal from the hub. To do this, you need a socket.
Candle Wax Is Probably The Easiest Way To Get Bearings Out Without A Bearing Press Or Vice;
Once you remove the nuts and washer, you may remove the wheel. This is just a quick little tutorial on how to take your bearings out of your skateboard wheels. This should be done gently and slowly at a downward angle so that the wheel is unaffected as the bearing is removed.
This Is My First Tutorial So If You Want More Of This Kind O.
You will need to remove. You should pry the wheel. Now pry your skateboard wheels out before you can remove the main bearing assembly.
Post a Comment for "How To Take Out Bearings On Skateboard Wheels"